COMMON INSTALLATION PROBLEMS WITH BABY GATES AND THEIR SOLUTIONS
CRUCIAL INSTALLATION WARNINGS
Installing baby gates requires a specific level of expertise; attempting this without the assistance of a professional could lead to safety hazards and increased expenses.
By reading this article, you acknowledge that you have understood and accepted the terms and conditions set forth here: Website Terms & Conditions.
The following examples highlight common challenges faced during installations, which may echo your own experiences and offer helpful solutions.
INSTALLATION ISSUE 1: UNEVEN SURFACES
ADDRESSING THE PROBLEM OF UNEVEN SURFACES
-
- Measure the widest point at the top to determine the required size for the gate and any extensions needed. (CLICK HERE FOR MEASURING GUIDELINES).
- Once you have the gates/extensions, use an angle grinder equipped with a metal/aluminium disc to accurately cut the gate, following the measurements indicated in the reference images above.
- Remove the plastic component from the section you plan to cut and insert it into the modified part of the gate to ensure that the tension knob fits correctly.
- This process will be clearer when you have the gate in your possession.
INSTALLATION ISSUE 2: MOUNTING ON AN ANGLED WALL
RESOLVING THE ISSUE OF MOUNTING ON AN ANGLED WALL
-
- Ensure that the gate/extensions are prepped for installation.
- Use Pratley Putty Quickset to fill any gaps and create a flat surface on the wall.
- Allow the Putty to cure fully BEFORE tightening the tension knobs to securely attach the gate using pressure.
- Do not rely on the gate for safety until all procedures are complete and the gate has been tested for stability.
INSTALLATION ISSUE 3: OUTDOOR INSTALLATION OF BABY GATES
NAVIGATING THE CHALLENGE OF OUTDOOR BABY GATE INSTALLATION
While setting up baby gates outdoors may appear to be a fast and cost-effective solution, it could potentially void the warranty on these products.
I recommend that outdoor installations of baby gates be viewed solely as a temporary and economical measure. This may risk voiding your warranty on the gates.
-
- Baby gates are specifically engineered for indoor use and are not designed to withstand outdoor conditions due to potential exposure to severe weather.
- This restriction is clearly stated in the warranty documentation that accompanies the product.
- Failure to adhere to warranty conditions will result in the loss of warranty coverage.
For a long-lasting solution, consider hiring a contractor who specialises in security or latch gates. Although this may involve higher costs, it is the most effective approach.
PREPARING THE BABY GATE AND EXTENSIONS FOR OUTDOOR USE:
Disclaimer: None of these precautions guarantee complete rust protection; however, they aim to extend the lifespan of the gate under South African weather conditions.
Regular maintenance every 1-2 months can significantly diminish the risk of rust.
To reduce rust and moisture accumulation, adhere to the following guidelines:
-
- Prior to installation, treat the baby gate, extensions, and mounting kit, ensuring to cover surface areas at the base as well.
- Drill drainage holes at the bottom of the gate using an 8mm steel drill bit. This will facilitate water drainage and prevent rust from forming inside the hollow gate, where moisture may gather at joints, connectors, and tension knobs. The holes will provide ventilation to avert moisture build-up.
- Apply a light coat of Rustoleum Painters Touch 2X Ultra Cover – Satin Clear 340g, available at takealot.com, to the baby gate, extensions, and mounting kit.
- Allow to dry completely (approximately 2 hours), then apply a second coat.
For existing rust:
-
- Spray the affected areas with Rust-Oleum Rust Reformer 291g, following the product guidelines.
- Consult the product description on takealot.com; you may need to acquire mineral spirits to clean any overspray on non-rusted areas.
- The rust reformer will convert rust to a black colour, which should then be coated with Rust-Oleum Stops Rust Enamel Gloss White 340g, available on takealot.com.
The post Baby Gate Challenges and Hacks appeared first on Baby Proof SA.
The Article Baby Gate Hacks to Overcome Common Challenges Was Found On https://limitsofstrategy.com
The Article Baby Gate Hacks for Easy Solutions to Common Issues found first on https://electroquench.com
